Third Cycle Programmes
    (Doctorate Degree)
Second Cycle Programmes
    (Master's Degree)
First Cycle Programmes
    (Bachelor's Degree)
Short Cycle Programmes
    (Associate's Degree)
 
Short Cycle Programmes (Associate's Degree)

- -



General Description
History
Construction Technology Department, which is one of the basic departments of Yozgat Bozok University Technical Sciences Vocational School, was established in 2002 within the body of Erciyes University. With the establishment of Bozok University in 2006, it became a part of this new university. The basic education principle of the Construction Technology Department; By combining current, scientific and technological studies, the student is trained to meet the requirements of the technological era in the field of construction and educates the intermediate staff desired by the sector. The language of education is Turkish.
Qualification Awarded
Graduates who successfully complete the program by fulfilling all the requirements receive the "Associate Degree in Construction Technology" degree. This degree awarded corresponds to the 5th level education level within the framework of the European Qualifications framework.
Level of Qualification (Short Cycle , First Cycle , Second Cycle, Third Cycle)
Short Cycle
Specific Admission Requirements
Within the framework of the regulations determined by the Council of Higher Education (YÖK), student admission to this program is done through the examination system conducted by the Measurement Selection and Placement Center (ÖSYM). Student registration procedures; Measurement, Selection and Placement Center (ÖSYM) is done within the framework of the principles set. The Rector's Office announces the registration dates, required documents and registration places of the candidates who will register to the University for the first time each year. Registration procedures are carried out by the Registrar's Office. Final registration is not possible with missing documents or mail. The records of those determined to be tampered with are not recorded. Candidates must have a high school or equivalent diploma and have sufficient score from the University Student Selection Exam.
Specific Arrangements For Recognition Of Prior Learning (Formal, Non-Formal and Informal)
Recognition of previous formal (formal) learning in Turkish Higher Education institutions, vertical, horizontal, and within the university, within the university, "TRANSITION BETWEEN PROGRAMS AT THE HIGHER EDUCATION INSTITUTE AND BETWEEN UNDERGRADUATE PROGRAMS, DOUBLE MAINAL, CREDITS BETWEEN INSTITUTIONS AND TRANSFER TO INSTITUTIONS "REGULATION". based on non-formal certification outside formal educational institutions in Turkey or based on experience (in-formal and non-formal) recognition of the learning process it is at an early stage. For this reason, recognition of prior learning has not been fully initiated in all programs of Bozok University. However, exemption exams are held at the beginning of each academic term for courses such as Computer and English and German in the education plans of the programs. Students who think that they provide the qualifications expected from these courses have the right to take exams. Students who take the exam and succeed are exempt from the related courses in the curriculum.
Qualification Requirements and Regulations
Students who successfully complete the two-year (four semesters) education and training courses (120 ECTS in total) and 30 working days of compulsory vocational internship will receive an associate degree.
Profile of The Programme
The Construction Technology Program is a program that provides pre-education and training on the construction and operation of any building that people use in their daily lives. Construction Technology is a technical discipline based on mathematics and physics education and then general information is given in major engineering sciences such as building, mechanics, hydraulics, building materials, transportation, geotechnical and building management. The main goal of the program is; to train technical staff who follow science and technology, equipped with the necessary knowledge and skills to transfer this information into practice in parallel with the developing technology. For this purpose, in our program, besides the theoretical information, practical information to be used in the field of application and language training of many computer programs (SAP2000, IDESTATIC, AUTOCAD) related to the department are provided. Students who graduate from the construction technology program are expected to: special engineering, architecture offices, construction companies, building inspection firms and the public sector are trained as necessary intermediate staff (professions) who have sufficient knowledge and business skills in the subjects they need.
Occupational Profiles of Graduates With Examples
Construction technicians; It is the profession group that works as a technical staff in natural resource, transportation / highway, building departments and material testing laboratories of firms that actively take part in construction constructions of dams, roads, airports, residences, etc., and provide control services. They play an important role as technical staff in the planning, project, construction and control phases of all structures, from roads, bridges, dams, airports, water supply / distribution systems and residential to commercial centers.
Access to Further Studies
Graduates of the department can continue to some programs of open education without examination. Those who are successful in the applied adaptation program continue from the 3rd grade. They have a bachelor's degree from a field other than their field (business, economics etc.). 2-They can continue their education in their fields by entering the Vertical Transfer Exam (DGS) in the departments that are made after graduation and determined in their fields.
Examination Regulations, Assessment and Grading
In order for each student to register for the courses at the beginning of the semester and to take the final exam, they must have attended at least 70% of the courses and at least 80% of the practices. For each course, students are subjected to mid-term studies (midterm, quiz, homework, project, application or similar studies) and final exam. All exams are evaluated over 100 points. In the semesters, one midterm and one final exam are held. The student's grade is determined by adding 40% of the midterm and 60% of the final exam.
Graduation Requirements
Students who successfully complete all 120 ECTS equivalent courses in the program and achieve a GPA of at least 2.0 out of 4.00 are eligible to graduate. In addition to successfully completing the courses, conducting an internship is also a must for graduation.
Mode of Study (Full-Time, Part-Time, E-Learning )
-
Address, Programme Director or Equivalent
Address : Yozgat Bozok University Technical Sciences Vocational School Bahçaşehiemahallesi, Esentepe Place, 66200, YOZGAT Phone : +90 (354) 217 17 81 - 217 17 82 - 212 38 43 Document Pass : +90 (354) 217 17 80 Email : teknikbilimler.myo@bozok.edu.tr Web address : http://myoteknik.bozok.edu.tr
Facilities
In the Construction Department, using the technology classes outside the classes where students are trained; basic computer applications, CAD applications and all kinds of presentation monitoring are available. In Computer Laboratories, important computer software (such as SAP2000, IDESTATİK, AUTOCAD) for Construction Technology are offered to students. In the laboratories established for the Construction Technology Program, there are experimental environments on basic subjects such as floor, building material and concrete technology.

Key Learning Outcomes
1Has sufficient theoretical and practical knowledge in the field of Basic Sciences and Construction Technology and uses this information.
2Recognize materials that may be required in the field of Construction Technology and use this information.
3Works in single or multidisciplinary working groups and provides effective communication
4To be able to convey his / her thoughts at the level of basic knowledge and skills in written and verbal communication.
5Uses the necessary techniques and tools for applications.
6Has the skills to design and conduct experiments, and to analyze and interpret experimental results.
7Can use and apply experimental data at a basic level in the field.
8Think three-dimensionally, interpret, analyze and synthesize problems.
9To gain the ability to use the basic theoretical and applied knowledge acquired in the field in the same field, in a further education level or in a field of the same level
10Understands the necessity of lifelong learning and uses methods to keep their knowledge up to date.
11To be able to use information and communication technologies with computer software at the basic level required by the field.
12It has the ability to draw projects with computer software required by the field.
13It has and uses information about principles, laws, regulations and standards related to the field of Construction Technology.
14Acts with a sense of professional ethics and responsibility at the stage of detection and solution of the problems encountered
15It acts with an understanding of ethics and codes of conduct, the habit of behavior and social responsibility in professional practice, professional practice and professional research.
16Acts with an awareness of professional ethics and responsibility during the determination and solution of the problems encountered in ground mechanics.
17To be able to follow information in his / her field and communicate with colleagues by using a foreign language at least A2 General Level of European Language Portfolio.


Key Programme Learning Outcomes - NQF for HE in Turkey
TYYÇKey Learning Outcomes
11111111111111111
KNOWLEDGE1
SKILLS1
2
COMPETENCES (Competence to Work Independently and Take Responsibility)1
2
3
COMPETENCES (Learning Competence)1
2
3
COMPETENCES (Communication and Social Competence)1
2
3
4
COMPETENCES (Field Specific Competence)1
2
2


Course Structure Diagram with Credits
1. Semester
No Course Unit Code Course Unit Title Type of Course ECTS
15 İTP-101 Compulsory 3
16 İTP-103 Compulsory 5
17 İTP-105 Compulsory 4
18 İTP-107 Compulsory 3
19 İTP-109 Compulsory 5
20 İTP-111 Compulsory 4
25 ING-101 FOREIGN LANGUAGE (ENGLISH) I Compulsory 2
36 AIT-101 PRINCIPLES OF ATATURK AND HISTORY OF TURKISH REVOLUTION I Compulsory 2
41 TDL-101 TURKISH LANGUAGE I Compulsory 2
Total 30
 
2. Semester
No Course Unit Code Course Unit Title Type of Course ECTS
15 İTP-102 Compulsory 5
16 İTP-104 Compulsory 4
17 İTP-106 Compulsory 5
18 İTP-SDG-II Elective 0
19 KP102 Compulsory 2
24 ING-102 FOREIGN LANGUAGE (ENGLISH) II Compulsory 2
33 AIT-102 PRINCIPLES OF ATATURK AND HISTORY OF TURKISH REVOLUTION II Compulsory 2
42 TDL-102 TURKISH LANGUAGE II Compulsory 2
Total 22
 
3. Semester
No Course Unit Code Course Unit Title Type of Course ECTS
17 İTP-201 Compulsory 4
18 İTP-203 Compulsory 3
19 İTP-205 Compulsory 4
20 İTP-207 Compulsory 3
21 İTP-SDG-III Elective 0
22 STJ-100 Compulsory 4
Total 18
 
4. Semester
No Course Unit Code Course Unit Title Type of Course ECTS
19 ASDG-IV Elective 0
20 İTP-202 Compulsory 3
21 İTP-204 Compulsory 4
22 İTP-206 Compulsory 2
23 İTP-208 Compulsory 4
24 İTP-210 Compulsory 3
25 İTP-SDG-IV Elective 0
Total 16
 
No Course Unit Code Course Unit Title Type of Course ECTS
No Course Unit Code Course Unit Title Type of Course ECTS
1 INNY1106 INFORMATION AND COMMUNICATION TECHNOLOGIES Elective 5
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1009 BİLGİ VE İLETİŞİM TEKNOLOJİLERİ Elective 4
2 İTP1011 ÇEVRE KORUMA Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1013 İŞ SAĞLIĞI VE GÜVENLİĞİ Elective 3
2 İTP1015 FOTOĞRAFÇILIK Elective 3
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1009 BİLGİ VE İLETİŞİM TEKNOLOJİLERİ Elective 4
2 İTP1011 ÇEVRE KORUMA Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1013 İŞ SAĞLIĞI VE GÜVENLİĞİ Elective 3
2 İTP1015 FOTOĞRAFÇILIK Elective 3
FOREIGN LANGUAGE I
No Course Unit Code Course Unit Title Type of Course ECTS
FOREIGN LANGUAGE I
No Course Unit Code Course Unit Title Type of Course ECTS
1 İKLY1105 ENGLISH I Elective 2
2 İKLY1106 GERMAN I Elective 2
3 İKLY1107 FRENCH I Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
No Course Unit Code Course Unit Title Type of Course ECTS
1 INNY2112 BUSINESS ETHICS Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1010 MESLEK RESMİ Elective 4
2 İTP1012 MESLEKİ İNGİLİZCE Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1014 MESLEK ETİĞİ Elective 2
2 İTP1016 GİRİŞİMCİLİK Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1010 MESLEK RESMİ Elective 4
2 İTP1012 MESLEKİ İNGİLİZCE Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP1014 MESLEK ETİĞİ Elective 2
2 İTP1016 GİRİŞİMCİLİK Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP-108 ARAZİ ÖLÇMELERİ Elective 4
2 İTP-110 MESLEKİ MATEMATİK Elective 4
3 İTP-112 PREFABRİK YAPILAR Elective 4
4 İTP-114 AHŞAP YAPILAR Elective 4
5 İTP-116 MESLEK RESİM Elective 4
FOREIGN LANGUAGE II
No Course Unit Code Course Unit Title Type of Course ECTS
FOREIGN LANGUAGE II
No Course Unit Code Course Unit Title Type of Course ECTS
1 IKLY2105 ENGLISH II Elective 2
2 IKLY2106 GERMAN LANGUAGE-II Elective 2
3 IKLY2107 FRENCH LANGUAGE-II Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2013 BİLGİSAYAR DESTEKLİ ÇİZİM Elective 4
2 İTP2015 PROJE ETÜDÜ VE UYGULAMASI Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2017 EL SANATLARI Elective 3
2 İTP2019 BEDEN EĞİTİMİ Elective 3
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2013 BİLGİSAYAR DESTEKLİ ÇİZİM Elective 4
2 İTP2015 PROJE ETÜDÜ VE UYGULAMASI Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2017 EL SANATLARI Elective 3
2 İTP2019 BEDEN EĞİTİMİ Elective 3
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP-209 ENDÜSTRİYEL YAPILAR Elective 4
2 İTP-211 SU TEMİNİ VE İLETİMİ Elective 4
3 İTP-213 KARAYOLU İNŞAATI Elective 4
4 İTP-215 YAPI DENETİMİ Elective 4
5 İTP-217 ŞANTİYE ORGANİZASYONU Elective 4
6 İTP-219 KALİTE GÜVENCE VE STANDARTLAR Elective 4
7 İTP-221 TEMEL İNŞAATI Elective 4
8 İTP-242 İŞ YERİ EĞİTİMİ Elective 12
No Course Unit Code Course Unit Title Type of Course ECTS
No Course Unit Code Course Unit Title Type of Course ECTS
No Course Unit Code Course Unit Title Type of Course ECTS
1 BGNY4105 QUALITY ASSURANCE AND STANDARTS Elective 3
No Course Unit Code Course Unit Title Type of Course ECTS
1 INNY210 BUILDING INFORMATION Elective 2
2 INNY212 BUILDING INSTALLATION Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2012 YAPI TESİSATI Elective 2
2 İTP2014 ARAŞTIRMA YÖNTEM VE TEKNİKLERİ Elective 2
3 İTP2024 BİNA BİLGİSİ Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2016 KALİTE GÜVENCE VE STANDARTLARI Elective 4
2 İTP2018 YALITIM MALZEMELERİ Elective 4
3 İTP2020 TEMEL DEPREM BİLGİSİ Elective 4
4 İTP2022 YAPI DENETİMİ Elective 4
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP2012 YAPI TESİSATI Elective 2
2 İTP2014 ARAŞTIRMA YÖNTEM VE TEKNİKLERİ Elective 2
3 İTP2024 BİNA BİLGİSİ Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP-228 MESLEK ETİĞİ Elective 2
2 İTP-232 KİŞİSEL GELİŞİM Elective 2
3 İTP-234 İLETİŞİM Elective 2
4 İTP-236 ÇEVRE KORUMA Elective 2
5 İTP-238 GİRİŞİMCİLİK Elective 2
No Course Unit Code Course Unit Title Type of Course ECTS
1 İTP-212 TÜRK EVİ PLAN TİPOLOJİSİ Elective 4
2 İTP-214 TEMEL DEPREM BİLGİSİ Elective 4
3 İTP-216 İLERİ KALIP TEKNOLOJİSİ Elective 4
4 İTP-218 BETONARME PROJE Elective 4
5 İTP-220 ARAZİCAD (NETCAD) Elective 4
6 İTP-222 İHALE DOSYASI HAZIRLAMA VE HAKEDİŞ Elective 4
7 İTP-224 MAKET YAPI TASARIMI Elective 4
8 İTP-226 İŞ YERİ EĞİTİMİ Elective 12
 
Yozgat Bozok University, Yozgat / TURKEY • Tel  (pbx): +90 354 217 86 01 • e-mail: uo@bozok.edu.tr